How To Install A Wood Burning Fireplace In A House Without One

Everyone would love a warm and cozy home. However, not every house is equipped with a fireplace to do the heating. The good news is that it is easy to set up a fireplace. All you have to do is follow the right procedure and instructions. Also, the type of fireplace will determine the complexity of the job you have to do. 

Building and Zoning Codes

Before we look at the process of installing a fireplace, let us look at how building codes affect our project. You have to check whether there would be any restrictions to your fireplace projects. Some of the municipalities and countries only allow for a certain amount of emissions from a home-heating device. 

This will affect the type of fireplace you choose to install. The height and design of wood-burning fireplaces’ chimneys are regulated in certain areas. A qualified contractor will help you to be in accordance with the building codes.

Where is the Best Position to Place My Fireplace

Yes, the location of the fireplace affects the cost and complexity of your project. A fireplace is usually placed in a room that is used more often than the others except for the kitchen. The common areas are either the living room or the family room. 

Your contractor should help you understand the placement options and how they will affect your home. 

Procedure

This is where you actualize the dream of your house having a fireplace. Here is a step by step guide on how things can be done;

  1. Select the type of fuel you would like to use. 
See also  Is A Wood-Burning Fireplace Cost-Effective? (Expert Opinion)

Many of us would desire to have a wood-burning fireplace. Such fireplaces give the home the traditional fireplace look. Also, you will have enough heat output and energy independence. You can opt for a gas fireplace if the gas prices are low in the area you reside in. Gas fireplaces are the best if you are hoping for pure comfort. 

  1. Provide Room For the Upcoming Fireplace

You would want to place your fireplace on an exterior wall as it is easier to ventilate it that way. It is even much easier if you have a chimney cutting into the roof. The vents will have to be made out of steel tubes. Having a brick chimney means you will have to tear down a part of the wall. 

Making a cardboard model will help you see all the challenges you may face.

  1. Shopping for the Right Model

The actual fireplace is actually already assembled and in the shops. Consider all the factors that make a unit suitable for your home. The instruction manual is important to get it fixed. Decorations will have to be done by a professional or even yourself. This part of the fireplace project is critical and should be done meticulously. 

  1. Get the Permits

This is a major renovation of a house and will mostly require a permit from the relevant authorities. Do not skip this step as there are future consequences. If you plan on selling the house, you could be fined for not acquiring a permit to do the changes. 

  1. Replace the Flooring 

Your fireplace will need a place to sit on. The surface has to be hard, smooth, and made of material that would not catch fire easily. The ideal materials are hardwood, concrete, and brick. Also, use more non-flammable materials to prevent the embers from jumping into the room. 

  1. Create the Vent Hole
See also  Which Wood Smells Best in a Fireplace?

Start by cutting a hole in the interior the size of the vent pipe. Do the process slowly while watching out for the electric wires. It will be better to reposition the vent rather than the wires. You can then cut a larger section which you will have to fill up later. Make sure the hole reaches the exterior of the building. 

  1. Installing the Vent

You have to install the firestop first to protect the walls from the vent pipe. Screws and adhesives are used in this case. You can then attach the vent pipe from the fireplace through the firestop. The exterior cover should then be added as the final piece to both interior and exterior walls. Caulk can be used to seal the small holes. 

  1. Frame the Fireplace

The fireplace in this case is properly functioning. However, you would opt for a more permanent and desirable look. First, use wood to build the desired frame before adding the concrete works. This will create a continuous flow with the walls. Once it is done, you can then paint and add desired decorations. 

  1. Test Your Fireplace

Yes, you have to test your fireplace so as to be sure it was properly installed. This has to be done while you are still at home to monitor it. Preferably, it should be done in the morning so that the observations can be made throughout the day. You should go outside and check if the vent pipes are working properly. 

How Much Does it Cost to Add a Wood Burning Fireplace to an Existing Home?

The average cost according to guides in 2021 ranges from $1,200 to $2,900. This is the cost of installing a single unit. They come with insulated chimneys that are around 9 inches long. They are the best options to help you cut down on electricity bills due to heating a room. 

See also  Can You Put A Blower In A Wood-Burning Fireplace? (Reasons Why)

Conclusion

The process of installing a wood-burning fireplace is quite an easy one. This can only be achieved if you make the correct decisions from the start. You can do it as a DIY project. However, it is recommended to have a professional do the job for your own safety. Remember to check out the building guidelines and permits. 

Related Posts